F-CON V-PRO

• Hardware and software for F-CON V Pro has been upgraded to version 3.4.
• Fuel Injector control is available up to 8 injectors. This enables setting of up to 8- cylinder engine with sequential injection system or 4-cylinder engines with twin injection system.
• In addition to independent ignition control for up to 8-cylinders, rev limit control by the ignition cut-off is possible (only for race use). With this function, the boost can be maintained to the full level even while stopped before a drag racing launch.
• An air fuel meter can be connected directly for use with closed loop mapping and data logging functions. User-friendliness has been taken into account.

Airflow
Throttle
Accelerator position
Intake Air Pressure
Water Temperature

FUNCTION
High level fuel & ignition controls based on full signal input functions and other controls that are connected with auxiliary outputs by option output function are available.

Airflow	Exhaust Gas Temperature	Atmospheric Air Pressure	Ignition Volume Correction
Throttle	Fuel Temperature	External A/F	Fuel Sub-Correction Selection
Intake Air Pressure	Oil Temperature	External Knocing	Ignition Sub-Correction Selection
Water Temperature	Fuel pressure	O2	Ignition Cut Rev Correction
Intake Air Temperature	Oil Pressure	Fuel Volume Correction	and more.

 

OPTION OUTPUT FUNCTION

To perform a hard level tuning from boost-up tuning, with this version of F-Con V Pro, data edit in real time that is not available by flash rewriting is possible, and setting workability is high. Also, driving data can be recorded using a log function.

Electric Fan Relay	Idle Control	Power Source Status	Warning Oil Temperature
Fuel Pump Relay	Log Status	Boost Control	Warning Exhaust Gas Temperature
NOS Relay	Anti-Lag Status	Warning Rpm	Warning Other Pressure
A/C Relay	Ignition Cut (Start) Status	Warning A/F	Warning Intake Air Pressure
Main Relay	Error Status	Warning Knocking	Warning Fuel Pressure
IC Spray	Communication Status	Warning Water Temperature	Warning Oil Presure

 

PRODUCT SIZE

W150 × D140 × H18（H32：The highest point on the coupler's side.)

 

SERIAL NUMBER REFERENCE