ADDITIVE DIRECT DRUG

Rapid-acting organic molybdenum oil additive

• Mo-DTC, an organic molybdenum friction reducer, reduces the friction coefficient of the internal parts by 50% compared to the utilization of engine oil itself. You will experience a quieter engine noise and improved engine response immediately.
• In this product, the rapid effect is enhanced by the addition of an effect booster.

Prevents wear and tear on Piston, Con-rods, Crank and some internal parts of the engine.

• The strong oil film created by HKS original base oil blend has a synergistic effect with the friction reducing effect of Mo-DTC and protects the engine components from wear. Especially effective for dry starts.

Highly recommended for situations below

• If your cars mileage has increased and you are concerned about engine mechanical noise.
  >>> The friction reduction effect reduces the engine noise.
• Engine overhaul carried out. >>> The anti-wear effect prevents galling of new parts.

 

	Friction coefficient	Remarks
Stock Engine Oil (5W20)	0.14	Oil only
Engine Oil + ADD-II	0.06

 

The friction coefficient is reduced to less than 50% compared to engine oil without ADD-II.
The indentation after the test was also minimized thus protecting the metal surface.

 

Fuel Economy Test

ADD-II

 

Engine noise test at idle

Measured at 1m from the engine.
We've seen engine noise reduction of up to 3.8%!

 

How to Use

• This product contains 200ml.
• Stop the engine and add 1 bottle of this product to 3-5 liters of engine oil. (Add 3-6% of ADD-II to engine oil).
• The size of the container is designed to have enough room to prevent spillage during injection.

Test Results

• Engine oils with and without ADD-II were compared and using vibration analysis to test for engine parts wear.